Customs by mousedroidhoojib

[mousedroidhoojib]

Thanks heaps as always, @EndUser77 and @Starchaser.

Under orders from Alliance command Massasai-One, Luke Skywalker is sent to Tatooine to rendezvous with Anduvil of Ogem in the Mos Eisley Cantina, who brings news of an outbreak of Bledsoe's Disease.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 16 POA in Tinkercad
* modelling clay
* material
* Tamiya "Gold Leaf", "Metallic Brown", Citadel "Bronzed Flesh", "Mournfang Brown", "Mephiston Red", "Skull White", "Chaos Black" paints

 

[Starchaser]

Nice! That's a "deep cut" character, great choice.

 

[mousedroidhoojib]

Thanks so much @EndUser77, @Starchaser and @UKHistory

When patrons at the Star Bar become a little rowdy, Fuzz the bouncer puts them back in their place.

Recipe:

* 3D print of "MUFTAK, (TALZ) VINTAGE STAR WARS ACTION FIGURE, KENNER 3.75", 6" CREATURE CANTINA ALIEN PATRON, 5 POA, 1/18, 1/6" by vintage-star-wars-kenner-3-75-muftak-cantina-alien-20230309-120872-3ilant] by vividmotion, modified to include additional ball joint articulation at the shoulders and elbows
* material
* Tamiya "Flat White", "Semi Gloss Black", "Sky Grey", "Dark Grey", "Buff" paints

 

[mousedroidhoojib]

Thanks heaps @EndUser77 and @darthapathy

Senator Grebleips was involved in the No Confidence vote against Chancellor Valorum in the waning days of the Republic.

Recipe:

* 3D print of "Et aticulado" by frisaca2
* Tamiya "Light Brown", "NATO Brown", "Flat White", "Semi Gloss Black", Citadel "McGragge Blue" paints

 

[mousedroidhoojib]

Thanks once again, @EndUser77 and @Starchaser

What might the offspring of a Mermaid and a Minotaur appear as if the most human parts of each were recessed?

Recipe:

* 3D print of a character designed in MakeHuman and articulated in Tinkercad, featuring "Minotaur" by Calrais and "Polaris BJD Mermaid" by Blue_Icarian_wings
* Various greeblies from Hasbro GI Joe, Bridge The Hobbit, McFarlane DC Mutiverse and Jakks Pirates Of The Caribbean figures
* Tamiya "Flat Earth", "NATO Brown", "Metallic Brown", "Titanium Silver", Citadel "Bleached Bone", "Chaos Black", "Skull White" paints

 

[Starchaser]

That would be a scary thing to run into while swimming! Would the female version be a true Sea Cow?

 

[mousedroidhoojib]

Thanks as always @Starchaser and @EndUser77. There may be a sea cow (dugong rather than manatee though) appearing at some point in the future as part of a wider idea that has been kicking around in my head for a while.

Of the bizarre colouring and stylings the Kenner artisans used for the vintage cantina character action figures, the one which is perhaps the most strange is Momaw Nadon, aka Hammerhead.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad, featuring elements from “Ithorian Civilian (Star Wars Legion Scale)” by McAnultyMiniatures
* material
* Tamiya "NATO Brown", "Buff", "Flat White", "Semi Gloss Black" paints

 

[Starchaser]

I like that a lot! Wish Hasbor would do the original four

 

[mousedroidhoojib]

Thanks so much once more, @EndUser77 and @Starchaser .

The classic Marvel Comics Star Wars series quite often featured familar characters, such as Princess Leia, depicted in costume shades that could only possibly exist in a four colour world.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad
* 3D print of "Han Solo and Leia Replacement Heads for Legion" by 4ADuel
* material
* Citadel "Eldar Flesh", "Bugman's Glow", "Mournfang Brown", "Scorched Brown", "Burnished Gold", "Skull White", "Chaos Black" paints

 

[mousedroidhoojib]

Thanks heaps @EndUser77.

The classic Marvel Comics Star Wars series quite often featured familar characters, such as Luke Skywalker, depicted in costumes that could only possibly exist in a four colour world.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad, featuring “Luke Skywalker v2” by Toshi_TNE
* material
* Tamiya "Flat Flesh", "Dark Yellow", "Flat White", "Semi Gloss Black", Citadel "Averland Sunset", "Macgragge Blue", "Mournfang Brown" paints

 

[Starchaser]

I'm really liking these throwbacks!

 

[YAK_Chewie]

Very cool stuff, I agree with Starchaser - loving these nostalgia figures. Very fun - always enjoy your creativity and execution.

 

[mousedroidhoojib]

Thanks so very much @EndUser77 , @Starchaser and @YAK_Chewie

The classic Marvel Comics Star Wars series quite often featured familar characters, such as Lando Calrissian, depicted in costumes that could only possibly exist in a four colour world.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad, featuring “Lando" by KrakenHeads
* material
* Tamiya "Flat Earth", "NATO Brown", "Flat White", "Semi Gloss Black" paints

 

[Starchaser]

Boy those colors pop! He turned out well. I bet trying to do that cravat was a challenge.

 

[mousedroidhoojib]

Thanks as always @Starchaser , @EndUser77 and @YAK_Chewie

The classic Marvel Comics Star Wars series quite often featured familar characters, such as Han Solo, depicted in costumes that could only possibly exist in a four colour world.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad, featuring "Solo" by Toshi_TNE
* material
* Tamiya "Flat Flesh", "NATO Brown", "Titanium", "Flat White", "Semi Gloss Black" paints

 

[Starchaser]

Nice job! Never bought that color combination for Han...but you did a great job bringing it "to life."

 

[mousedroidhoojib]

Thanks so much, @EndUser77 and @Starchaser

The classic Marvel Comics Star Wars series quite often featured familar characters, such as Admiral Ackbar, depicted in costumes that could only possibly exist in a four colour world.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 18 POA in Tinkercad, featuring "SW Admiral Ackbar Bust - Head and Body" by Jace1969
* material
* Citadel "Mournfang Brown", "Averland Sunset", "Sunburst Yellow", "Ice Blue", "Bugman's Glow", "Chaos Black", "Skull White" paints

 

[Starchaser]

Now that works for me! Nice job.

 

[mousedroidhoojib]

Thanks muchly @Starchaser

Alongside Rik Duel and Chihdo, the Zeltron adventurer and master thief Dani crossed path with the heroes of the Rebel Alliance in their battle with the Empire.

Recipe:

* 3D print of a character designed in MakeHuman and articulated to 20 POA in Tinkercad
* modelling clay
* material
* Citadel "Bugman's Glow, "Mephiston Red", "Macgragge Blue", "Liche Purple", "Chaos Black", "Skull White" paints

 

[Starchaser]

Nice...I liked her character. Great job with the soft goods. The boots are particularly excellent!